• 2018-02-01 17:00:25
HMG100-TP Coal Shearer

HMG100-TP Hydraulic Haulage Shearer is the thinnest coal shearer in China. This hydraulic shearer is applicable to the 0.4-0.9m coal thickness.
Cutting height: 440~900mm
Dip angle of coal seam: <35°
Coal hardness: f≤ 3
Capacity: 75~100t/h
Length: 4525mm
Height:350(YR)/310(Part330)(YRA)mm
Width: 910mm


Chat Online Leave Message

HMG100-TP Hydraulic Haulage Shearer



MG100TP_YR_HAULAGE_SHEARER_coal_mining_super_low_coal_shearer_underground_coal_mining_HOT Mining_1 


1. Brief Introduction


 

HMG100-TP  Hydraulic Haulage Shearer is the thinnest shearer in China. The body of  it is short and narrow. It’s used in the coal seam  that is 0.4~0.9m ,coal property is medium-hard ( f ≤3) and the slope angle<35°, the maximum  slope angle can be 45°as your requirement. When the slope angle>18°,the machine needs to add the Non-slip winch. It can be used with scraper conveyors and hydraulic prop in the conventional mining working face.


2.Main Features


2.1 This hydraulic haulage shearer uses “three tracks” coal mining working. Because it can climb on the floor of whole body, the requirements for corollary equipment such as transport and support are not high.The cost of general machinery and equipment would be lower.

2.2 The machine itself has a loading mechanism. The coal cutted by spiral drum is transfered to conveyor by loading machine. And the result of coal loading is good.

2.3 The powerful motor power and good mechanical strength can cut hardish coal seam and with low gangue coal seam.

2.4 The body machine is short, and the thickness of machine is the thinnest in China compared with the same power shearers,the cutting height is lowest.

2.5 It is easy to operate for concentrated operators and buttons.

2.6 The tractive force is large. Hydraulic traction systems are reliable. Hydraulic components of good performance is easy to replace.

2.7 With spray device,the dust removal result is good.

2.8 The good performance shearer machine and the sample and reliable structure make coal shearer easy to maintain. It is suitable for small mines.


3. HMG100-TP Technical Parameters


No.

Item

Unit

Capacity

1

Mining height

mm

440-900

2

Dip angle

< 30°

3

Coal hardness

f

≤3

4

Production capacity

t/h

75-100

5

The length of the machine

mm

4525

6

The height of the machine

mm

350 (YR)/310

(part330)(YRA)

7

The width of the machine

mm

driving chain sprocket and drum shaft are not included in

8

Conveyor type


HSGD420/22 OR HSGB420/30

9

Machine height(including  joist 20)

mm

370  ( YR)   /330

( part 350)(YRA)

10

Output power

kw

100

11

Voltage

V

660

12

Total installed power


100

13

Rotate speed of drum shaft

r/min

111

14

Depth of cut

mm

10-20

15

Drum diameter


440-900

16

Mode of traction


Hydraulic anchor chain traction

17

The specification of chain

mm

∮18 x 64 、 ∮ 22 x 86

18

The breaking force chain

kN

410 、730 (C class)

19

Traction speed

m/min

0-4

20

Traction

kN

160

21

Supporting form


Single hydraulic prop

22

Weight


7.3



4. Workshop

MG100TP_YR_HAULAGE_SHEARER_coal_mining_super_low_coal_shearer_underground_coal_mining_HOT Mining_2

MG100TP_YR_HAULAGE_SHEARER_coal_mining_super_low_coal_shearer_underground_coal_mining_HOT Mining_3