AC Electric Haulage Shearer is used to extract thin coal seam.. It uses multi-motor driver, transversal arrangement.
Cutting height range:1.5－2.4m
Slope Angle≤ 600 (< 30。four-quadrant) 。
Coal Hardness ≤4.5f
Total Installed Power:468kW
The cutting motor power :2* 2*100kW
Traction motor power:2*30kW
The pump motor power:7.5kW Voltage class:1140V
HMG100/240-BW Double Drum Shearer
HMG100/240-BW thinnest shearer is a new type machine for mechanized coal mining working face and high-grade mechanized coal mining working face.
Cutting height range：0.85-1.5m
Slope Angle：≤30° Coal Hardness：≤3.5
Total Installed Power：2*100+40kW
Coal Gap：192 Designed capacity：437t/h
Voltage class：1140V Machine Surface Height：674mm
Maximum cutting height：1500mm
SWS100/230-WD Shortwall Shearer
SWS100/230-WD shearer is the latest developed double-drum type which is suitable for shortwall and large inclination-angle panel.
HMG2x80/388-BWD AC Electric Haulage Shearer is used for low coal seam and super low coal seam.
Dip angle of coal seam:≤60°(<30°Four-guadrant)
Total installating power:Kw388
Cutting motor power:2*2*80Kw
Traction motor power:2*30Kw
HMG100/111-TWD Electric Haulage Shearer
HMG100/111–TWD thin coal seam electric haulage shearer is frequency conversion speed regulating electric haulage shearer which comes out on the foundation of HMGI00-T shearer.
Drum Diameter(m):ф0.75: ф0.85; ф1.0
Drum Rotating Speed (r/min):82
HMG100/258-BWD AC Electric Haulage Shearer
HMG100/258-BWD AC Electric Haulage Shearer is used to extract low coal seam and super low coal seam. It uses multi-motor driver, transversal arrangement.
Cutting Height :0.9-1.6m
Dip Angle of Coal Seam:≤60°(<30°Four-guadrant)
Coal Hardness :f≤4.5
Total Installating Power:258kW Cutting Motor Power:2*100kW
Traction Motor Power:2*25kW
Pump Motor Power :7.5kW
Voltage Grade:1140V Machine Height:660mm
HMG100-TP Coal Shearer
HMG100-TP Hydraulic Haulage Shearer is the thinnest coal shearer in China. This hydraulic shearer is applicable to the 0.4-0.9m coal thickness.
Cutting height: 440~900mm
Dip angle of coal seam: <35°
Coal hardness: f≤ 3